-
StormSkin™
StormSkin™ polyurea is a very strong highly resilient super-polymer designed to aid in the protection of building infrastructures, pipelines, bridges, etc. This super-polymer is a derivative of BlastSkin™, a Military-Grade super-polymer, targeting extreme properties such as tear strength, impact and abrasion resistance. StormSkin is a non-breathable polyurea which eliminates water vapor transmission to underlying surfaces. This prevents metals to oxidize or rust under its impenetrable skin. It is used primarily to protect industrial infrastructures, waterproofing containment areas, steel frameworks, natural gas/oil pipelines, surge water walls, tanks reservoirs, rail cars, above and below ground piping, concrete and masonry waterproofing, heavy equipment coating, shipbuilding and harsh marine corrosive environments.
Engineering Technical Support Group for any technical questions regarding material, application or prospective uses.
Please call or email our Technical Support Group for any questions regarding material, application or prospective uses.
-
ToughTruck™ Bedliner
ToughLiner is an industrial abrasion resistant spray coating to be used on demanding surfaces such as automotive, marine and industrial linings. It provides excellent chemical, moisture and UV resistance. It is a two component 100% solids polyurea formulation containing no VOCs and is designed to deliver excellent adhesion and optimal curing in very cold to hot climates. It may be used directly on clean metals, fiberglass, concrete and masonry. A primer may also be required depending on particular substrate.
ToughLiner is applied by 2K high pressure plural component pumping machine. It delivers a 15 sec gel time with a 24 hour cure time to return to harsh service. It is available in Black and Dary Gray. Its finished surface may appear textured by applying a final fog-spray technique. It retains a wide functional temperature range and flexibility from -20F to 150F.Please contact our technical support group for specific substrate application procedures, equipment, safety gear and clean-up kits. Refer to MSDS for material and safety standard procedures.
-
WB Acrylic Modified Polyol
WB Acrylic Modified Polyol is designed to be used in 2K waterborne coating formulations. This line of friendly no-VOC aliphatic polyols combine a unique combination of properties which lend themselves for use in exterior weather resistant applications. These polyols exhibit excellent durability regarding resistance to abrasion, chemicals and sunlight when mixed with an isocyanate crosslinker. They may also create an optically clear high gloss or matte finish which is available in rigid or flexible versions. WB Acrylic Modified Polyols materials may be color pigmented to for solid or translucent appearance.
These acrylic polyols deliver up to 70% solids content and are available in fast drying or slow drying formulations resulting in mix ratios of eithr 2B:1A or 4B:1A. These polyols are intended to be used with polyisocyanate crosslinkers with mid to high degrees of %NCO such as WB Aliphatic Prepolymer-16 or WB Aliphatic Prepolymer-23. SuperSkinSystems offers a large range of WB Aliphatic Prepolymers form many customized coating formulations.
Recommended storage conditions are to protect from frost and high heat, temperature range: 45-95 F (7-35 C) and kept in tightly closed containers no longer than 12 months. KEEP FROM FREEZING. Please refer to MSDS for Product Safety and Regulatory information.
-
WB Aliphatic Isocyanate Prepolymer
WB Aliphatic Prepolymer is designed to be used in water-dispersible formulations. It may be used in many variations of an extremely tough optically clear weather resistant UV stable water-borne coatings. It exhibits excellent durability regarding resistance to abrasion, chemicals and sunlight.
-
WB Aliphatic Isocyanate Prepolymer-23
WB Aliphatic Prepolymer-23 is designed to be used in water-dispersible formulations. It may be used in many variations of an extremely tough optically clear weather resistant UV stable water-borne coatings. It exhibits excellent durability regarding resistance to abrasion, chemicals and sunlight.
-
WB Aliphatic Prepolymers (WB APU Series)
WB APUs are a new family of water-based aliphatic prepolymers using 2K WB polyurea technology. The proprietary isocyanate prepolymers are designed to be reacted with our water-based polyols to produce high strength UV resistant coatings while enhancing other properties such as abrasion resistance, adhesion, tensile strength and extended gel, tack free times and wet-out times. These solvent-free polyisocyanate prepolymers are offered in specific NCO content grades to deliver the desired properties of your end products and formulation requirements. Please contact our engineering group for customization solutions for your specific requirements.
-
WB ClearSkin
WBClearSkin is an extremely tough optically clear weather resistant UV stable 2K water-borne coating. It exhibits excellent durability regarding resistance to abrasion, chemicals and sunlight. This rugged material is designed to handle industrial floors, heavy traffic and stain-resistance. Given its hard shell, penetrating nature, cleanability and anti-microbial additives it is used in hospitals, food processing plants, food storage facilities, aircraft hangers, subway walls and other demanding surfaces requiring high performance protective characteristics. It maintains superior dry film hardness to protect against wear providing long-term ease of maintenance. This material may also be color tinted to match solid or translucent color systems only using SuperSkinSystems™ colorants. Levels of added color may provide decorative translucent to opaque appearances. WBClearSkin may be used over a host of diverse types of substrates such as concrete, brick, stone, metal, wood and composites.
WBClearSkin is primarily used as an industrial/commercial floor coating. It has many other diverse uses including parking decks, exterior siding, residential garage floors and other exterior/interior applications. It may also be used as stone/paver sealer and topcoat, wood and concrete primer and/or decorative textured colored finish as it supports aggregate broadcasts. See color textures chart here.There are 2 versions of the formulation to provide either a glossy or a matte finish.
WBClearSkin may be applied by a standard air-less spray equipment, roller or brush. Substrate surfaces must be clean/dry, free of contaminates and loose dust. SuperSkinSystems offers superior-cleansing enzyme agent materials to help loosen and degrease fatty oil impregnated surfaces to aid in preparatory efforts to provide a properly prepared substrate surface. These bio-enzyme cleaners deliver extreme deep cleaning to pre-existing machine-finished concrete surfaces. This surface coating system dries to a hard clear walk-on protective finish in 12 hours and fully cured withing 72 hours depending on drying conditions. Two (2) coats are recommended using a 2-3 hour re-coat window without abrading the surface. -
WB Jet Epoxy
WB Jet Epoxy is a water-based epoxy curing agent that lets you create unique microporous systems that are breathable and water vapor permeable preventing delamination and blistering. This means floors can be laid and returned to service quickly, without the extra costs involved with reducing moisture content of the concrete. It is based on a polymeric emulsion and, as a result, provides superior performance for a wide range of applications. It has been developed primarily for use with liquid epoxy resins, out-performing solid emulsion-based systems by offering the capability to formulate systems with zero VOC and without resin emulsifiers.
-
WB Modified Polyols
WB Acrylic Modified Polyols are designed to be used in 2K waterborne coating formulations. These polyols when reacted with aliphatic isocyanates exhibit excellent durability regarding resistance to abrasion, chemicals and sunlight. They may also create an optically clear high gloss or matte finish which is available in rigid or flexible versions. WB Acrylic Modified Polyols materials may be color pigmented for solid or translucent appearance.
These 70% solids acrylic polyols are avaiable in 2 euqivalent weights. These polyols are intended to be used with WB aliphatic prepolmers such as WB Prepolymer-16 or WB Prepolymer-23. SuperSkinSystems offers a large range of WB Aliphatic Prepolymers form many customized coating formulations.
Recommended storage conditions are to protect from frost and high heat, temperature range: 45-120 F (7-49 C) and kept in tightly closed containers no longer than 12 months. KEEP FROM FREEZING. Please refer to MSDS for Product Safety and Regulatory information.
-
WBE-2
WBE2 is a clear or pigmented 2- component water based aliphatic epoxy formulation with excellent chemical and UV resistance. WBE2 has great adhesion to most substrates such as concrete, metals and asphalt. There is no odor or vocs allowing it to use for inside applications. It is available with 50% nano size glass filler , anti static , anti-microbial, and anti-corrosive additives. WBE2 can be used as a primer and can be diluted with 25% water to penetrate porous concrete. WBE2 dries to a high gloss top coat . The glass filled dries to a matte finish with a nonskid finish.
WBE2 dries very fast depending on temperature , humidity and thickness. Typical drying times are 15 minutes with up to 8 hour pot life. WBE2 may be sprayed, brushed or rolled. Tack free at 75F is 15-30 minutes. At temperatures of 50F tack free times maybe 2 hours. Rolling should be done with a short knap roller. Typical use temperatures are between 25-150F . Full cure should be 24 hours.
WBE2 can be made with ESD ( electric static discharge) additives. Its available in clear or pigmented. Unlike other ESD resins which use carbon fibers , WBE2 does not need them . ESD materials are used in clean rooms or where sparks may cause serious problems.
Please contact our technical support group for specific substrate application procedures, equipment, safety gear and clean-up kits. Refer to SDS for material and safety standard procedures.
-
WBE-2 Primer
WBE-2 Primer is a clear or pigmented fast drying two-component aliphatic epoxy primer designed to promote excellent adhesion performance with no odor during interior application. It is available in hard or flexible formulations. It may be directly topcoated using many SuperSkinSystems coatings within a 48 hours period.
WBE-2 Primer may be used on many substrates such as steel, aluminium, fiberglass, concrete masonary and wood. It also may be formulated to include anti-corrosive properties for all oxidizing substrates. This special formulated primer may be applied to slightly damp surfaces. Full cure is achieved under normal conditions in 24 hours.
Please contact our technical support group for specific substrate application procedures, equipment, safety gear and clean-up kits. Refer to SDS for material and safety standard procedures.
-
WBSE-3
WBSE-3 is the next version of our WBE-2. It has the same characteristics as WBE-2 with long pot life up to 8 hours after mixing A & B, tack free times of under 20 minutes, fast cure times in 16 mil or less film thickness, but has a Silicone backbone built into the Hardener. This enables the WBSE-3 to have higher temperature better chemical, higher gloss, optically clear and better UV resistance.
WSBE-3 can also come with Nano size glass filler similar to WBE-2. Glass filled WBSE-3 has a matte finish and non-skid surface. The ratio of Resin to Hardener is 1 resin to 1 hardener without glass. The glass is premeasured so it an be added to the A&B mix with a jiffy mixer. WBSE-3 can be used on concrete, asphalt, steel, aluminum, and wood. Colors are available, simply send in a pantone, RAL, or SW color number. Surface preparation is still the same as WBE-2. Like all water based products freeze protection is required for shipping.
Please contact our technical support group for specific substrate application procedures, equipment, safety gear and clean-up kits. Refer to SDS for material and safety standard procedures.
WBE-3 can withstand up to 5 freeze/thaw cycles
-
WetSkin Epoxy Primer
WetSkin Epoxy is a superior slow-setting zero-VOC 100% solids epoxy primer formulated specifically for damp, humid, wet or underwater application conditions. It provides excellent adhesion to cold underground concrete surfaces. It provides good chemical and anti-corrosive resistance against water, mineral acids, alkalies, hydrocarbons and solvents. The unique nature of this epoxy permits its use in extreme environments such as underground concrete facilites, nuclear plants, vaults, water water treatment plants, water and chemical containment facilities, tunnels, industrial chemical plants and fresh water environments.
WetSkin is formulated in as a semi-rigid colorable low odor coating system to accommodate surfaces which exhibit a small degree of flexibility while delivering excellent impact strength. This primer coating may also be used to coat metal, wood, fabrics and composite substrates. Its heavy-duty performance characteristics enable it to be used with many types of construction, precasts, wet-floors or repairs producing an adhesion promoter for many super-polymer elastomers or topcoats such as StormSkin™, BlastSkin™, FireSkin, ChemSkin or family of ClearSkin products.Please contact our technical support group for specific material systems, substrate application procedures, application equipment, recommended safety gear and clean-up procedures. Refer to MSDS for material and safety standard procedures.
