-
WB Aliphatic Isocyanate Prepolymer
WB Aliphatic Prepolymer is designed to be used in water-dispersible formulations. It may be used in many variations of an extremely tough optically clear weather resistant UV stable water-borne coatings. It exhibits excellent durability regarding resistance to abrasion, chemicals and sunlight.
-
WB Aliphatic Prepolymers (WB APU Series)
WB APUs are a new family of water-based aliphatic prepolymers using 2K WB polyurea technology. The proprietary isocyanate prepolymers are designed to be reacted with our water-based polyols to produce high strength UV resistant coatings while enhancing other properties such as abrasion resistance, adhesion, tensile strength and extended gel, tack free times and wet-out times. These solvent-free polyisocyanate prepolymers are offered in specific NCO content grades to deliver the desired properties of your end products and formulation requirements. Please contact our engineering group for customization solutions for your specific requirements.
-
WetSkin Epoxy Primer
WetSkin Epoxy is a superior slow-setting zero-VOC 100% solids epoxy primer formulated specifically for damp, humid, wet or underwater application conditions. It provides excellent adhesion to cold underground concrete surfaces. It provides good chemical and anti-corrosive resistance against water, mineral acids, alkalies, hydrocarbons and solvents. The unique nature of this epoxy permits its use in extreme environments such as underground concrete facilites, nuclear plants, vaults, water water treatment plants, water and chemical containment facilities, tunnels, industrial chemical plants and fresh water environments.
WetSkin is formulated in as a semi-rigid colorable low odor coating system to accommodate surfaces which exhibit a small degree of flexibility while delivering excellent impact strength. This primer coating may also be used to coat metal, wood, fabrics and composite substrates. Its heavy-duty performance characteristics enable it to be used with many types of construction, precasts, wet-floors or repairs producing an adhesion promoter for many super-polymer elastomers or topcoats such as StormSkin™, BlastSkin™, FireSkin, ChemSkin or family of ClearSkin products.Please contact our technical support group for specific material systems, substrate application procedures, application equipment, recommended safety gear and clean-up procedures. Refer to MSDS for material and safety standard procedures.
-
WB ClearSkin
WBClearSkin is an extremely tough optically clear weather resistant UV stable 2K water-borne coating. It exhibits excellent durability regarding resistance to abrasion, chemicals and sunlight. This rugged material is designed to handle industrial floors, heavy traffic and stain-resistance. Given its hard shell, penetrating nature, cleanability and anti-microbial additives it is used in hospitals, food processing plants, food storage facilities, aircraft hangers, subway walls and other demanding surfaces requiring high performance protective characteristics. It maintains superior dry film hardness to protect against wear providing long-term ease of maintenance. This material may also be color tinted to match solid or translucent color systems only using SuperSkinSystems™ colorants. Levels of added color may provide decorative translucent to opaque appearances. WBClearSkin may be used over a host of diverse types of substrates such as concrete, brick, stone, metal, wood and composites.
WBClearSkin is primarily used as an industrial/commercial floor coating. It has many other diverse uses including parking decks, exterior siding, residential garage floors and other exterior/interior applications. It may also be used as stone/paver sealer and topcoat, wood and concrete primer and/or decorative textured colored finish as it supports aggregate broadcasts. See color textures chart here.There are 2 versions of the formulation to provide either a glossy or a matte finish.
WBClearSkin may be applied by a standard air-less spray equipment, roller or brush. Substrate surfaces must be clean/dry, free of contaminates and loose dust. SuperSkinSystems offers superior-cleansing enzyme agent materials to help loosen and degrease fatty oil impregnated surfaces to aid in preparatory efforts to provide a properly prepared substrate surface. These bio-enzyme cleaners deliver extreme deep cleaning to pre-existing machine-finished concrete surfaces. This surface coating system dries to a hard clear walk-on protective finish in 12 hours and fully cured withing 72 hours depending on drying conditions. Two (2) coats are recommended using a 2-3 hour re-coat window without abrading the surface. -
WB Jet Epoxy
WB Jet Epoxy is a water-based epoxy curing agent that lets you create unique microporous systems that are breathable and water vapor permeable preventing delamination and blistering. This means floors can be laid and returned to service quickly, without the extra costs involved with reducing moisture content of the concrete. It is based on a polymeric emulsion and, as a result, provides superior performance for a wide range of applications. It has been developed primarily for use with liquid epoxy resins, out-performing solid emulsion-based systems by offering the capability to formulate systems with zero VOC and without resin emulsifiers.
-
WB Acrylic Modified Polyol
WB Acrylic Modified Polyol is designed to be used in 2K waterborne coating formulations. This line of friendly no-VOC aliphatic polyols combine a unique combination of properties which lend themselves for use in exterior weather resistant applications. These polyols exhibit excellent durability regarding resistance to abrasion, chemicals and sunlight when mixed with an isocyanate crosslinker. They may also create an optically clear high gloss or matte finish which is available in rigid or flexible versions. WB Acrylic Modified Polyols materials may be color pigmented to for solid or translucent appearance.
These acrylic polyols deliver up to 70% solids content and are available in fast drying or slow drying formulations resulting in mix ratios of eithr 2B:1A or 4B:1A. These polyols are intended to be used with polyisocyanate crosslinkers with mid to high degrees of %NCO such as WB Aliphatic Prepolymer-16 or WB Aliphatic Prepolymer-23. SuperSkinSystems offers a large range of WB Aliphatic Prepolymers form many customized coating formulations.
Recommended storage conditions are to protect from frost and high heat, temperature range: 45-95 F (7-35 C) and kept in tightly closed containers no longer than 12 months. KEEP FROM FREEZING. Please refer to MSDS for Product Safety and Regulatory information.
-
ToughTruck™ Bedliner
ToughLiner is an industrial abrasion resistant spray coating to be used on demanding surfaces such as automotive, marine and industrial linings. It provides excellent chemical, moisture and UV resistance. It is a two component 100% solids polyurea formulation containing no VOCs and is designed to deliver excellent adhesion and optimal curing in very cold to hot climates. It may be used directly on clean metals, fiberglass, concrete and masonry. A primer may also be required depending on particular substrate.
ToughLiner is applied by 2K high pressure plural component pumping machine. It delivers a 15 sec gel time with a 24 hour cure time to return to harsh service. It is available in Black and Dary Gray. Its finished surface may appear textured by applying a final fog-spray technique. It retains a wide functional temperature range and flexibility from -20F to 150F.Please contact our technical support group for specific substrate application procedures, equipment, safety gear and clean-up kits. Refer to MSDS for material and safety standard procedures.
-
Saddle Foam
Saddle Foam is a unique fast-build 2-component multi-purpose 3.0 pcf structural foam designed specifically for pipeline trench retainment and pipe saddle suspension applications. This tough foam provides excellent uniform cellular foaming to quickly build high strength rigid barriers. The cured foam is hydrophobic, tough and resilient to cracking. It provides excellent bonding to many porous and non-porous substrates such as concrete, metals, fiberglass etc. Specific formulations may be obtained to properly fit demanding applications. Please contact our technical support group for specific substrate application procedures, equipment, safety gear and clean-up kits. Refer to MSDS for material and safety standard procedures.
-
Roto-Molding Resins
RotoMolding Resins are specifically formulated 2-component 100% solids hybrid polyurea-based material designed to produce dimensionally stable, structural hollow part moldings. This material is normally batch-mixed and poured into hollow room-temp mold. Solidification times may be tailored to accommodate large part or intricate moldings. Casting material is normally applied at room temperature. Resins may be colored-tinted as well as durometers may be formulated to range from 60A-75D. Resins may be neat or filled to meet material shrinkage requirements (1% to 0.5% respectively). Material formulations functional operation temperatures may be formulated to range from -20°F to 200°F.
-
Rapid Soil Stabilizer
Rapid Soil Stabilizer is a long-lasting UV stable 1-component cross-linked waterborne formulation delivering excellent chemical and water resistance. It is designed specifically for controlling heavy dust areas generated by aircraft, road traffic, construction site and areas prone to high gusting winds. Superior performance is achieved when the micro-polymers coalesce as water dissipates from the carrier system. High strength bonding forms between the soil and aggregate particles. The water-resistant co-polymer matrix dries clear and transparent leaving the natural landscape appearance.
Soil, sand and and harsh dust control are the primary applications for this engineered polymer. The micro-penetrating nature of this 30% solids material promotes its use for priming and sealing of masonry, wood, stucco and other porous substrates. This material may also be used as a primer in many SuperSkinSystem’s coating applications.
Rapid Soil Stabilizer is a spray applied solvent-free low viscosity dispersion which dries clear and flexible in 1 hour at room temperature. The product is odorless, non-hazardous, non-flammable and environmentally safe. Color pigments may be added to visually determine when re-coating is necessary. It is non-tracking, non-leaching and animal safe. It will not wash away with rain once cured continually providing a superior micron dust-net.
For technical assistance, please give our Customer Service/Tech Support Group a call at 404-216-4711 or 336-601-6005. Please refer to MSDS for material and safety standard procedures.
-
Rapid 1K
Rapid 1K is an aliphatic 1-component waterborne formulation delivering good chemical and water resistance while providing good abrasion resistance and fast-setting properties. It is designed to be used as a primer or topcoat sealer. This material is 42% solids and can be used on porous and non-porous substrates. This material is available in flexible, semi-flexible or rigid film.
Rapid 1K is an air-dry system where it is normally roll applied. This low viscosity dispersion dries clear and flexible in 10-15 minutes acquiring full-cure in 24 hrs or maybe forced dried at elevated temperatures. Rapid 1K-Topcoat is available in medium to high elongation formulations where flexibility is demanded. The high-flex version provides up to 600% elongation with a tensile strength of 2400 psi while the the medium-flex allows for 100%. Pigments and thickener additives may also be included to enhance its use.
-
Rigid Building Foams
Rigid Building Foams offer a unique blend of properties which yield excellent mechanical and thermally efficient structures. SSFR foams deliver high compressive/shear strength, insulating capacity, overall toughness and impact resistance. Their high performance strength to weight ratio densities produce a wide range of applications for very diverse industries. As an energy saving material yielding very high insulating values, paralleled with its sound absorbing capability it has seen much use in the architectural and construction industries. Rigid foams are applied in spray or casting formats. Pour casting diversifies its uses to the areas of consumer products manufacturing, mold making, marine docks, flotation, void fill, artwork carving and many industrial and commercial industries. SSFRs may be subsequently color top-coated, textured and clear coated to handle extensive outdoor rugged environments using the ClearSkin system. These materials maintain dimensional stability and will not deform or distort within operating temperature of -100F to 200F. Fire retardant formulations are used in structural public buildings and warehouses. Installation cure times range from 30 sec. to 30 min. depending on application method (spray vs. pour), ambient temperature and humidity. Pour foam applications require longer cure times and caution must be taken for large castings due to inherent exothermic reaction process. SSFRs utilize a standard 2-component liquid pumping machine for both the spray and pour methods of dispensing. Volumetric expansion of SSFR may be formulated up to 140x relative to its original volume depending on required application densities. Densities of 2-3 pcf have been tested to MIL-P21929C.
The Rigid Building Foams are water or gas blown (245 or Pentane) fast-set materials typically used for air-tight insulation applications due to their closed-cellular nature. These foams are premium building products which contribute structural integrity with moisture, air and chemical vapor barrier integrity. High insulating values are attibuted with these foams and as such are commonly in roof, wall and floor insulation applications, commercial freezers and all energy saving applications where high thermal insulating requirements are mandated. Values vary relative to foam densities. Foam coverage per sq.ft. will vary relative to the density also as governed by expansion characteristics, the ambient spray temperature and the substrate temperature.
Please contact our Customer Service and Technical Support Group for any questions or to provide direction with specific selection of a material system, questionalable target surfaces, operational procedures, material pumping/spray machines, spray/pour guns, safety protection gear and clean-up kits.
