Mixing Instructions

Casting Resins may be mixed and dispensed using a plural component pumping machine for pour casting or RIM injection. They may also be dispensed using low pressure pneumatic cartridge guns with static mixer tubes or hand batch mixed in bucket using jiffy mixer. When hand mixing, stir slowly and carefully as to not induce air into resin mixture. Cured material produces a smooth glossy surface. To obtain a Class A mold surface, mold surfaces must be polished smooth. Casting Resins must be mixed thoroughly before using. It is very important not to induce air bubbles while mixing as to avoid air entrapment. For closed mold RIM part manufacture, always provide adequate air-bleed tunnels or vents throughout mold perimeter. For pour casting of parts,small entrapped surface air bubbles may be relieved by quickly waving over the liquid surface with a propane torch. Please call email our Technical Support Group for any questions regarding material, application or direction of use.